At the same demonstration, Intel officials said they expected hardware manufacturing to begin around the end of 2010. On, in Brussels, Intel demonstrated a laptop with a Light Peak connector, indicating that the technology had shrunk enough to fit inside such a device, and had the laptop send two simultaneous HD video streams down the connection, indicating that at least some fraction of the software/firmware stacks and protocols were functional. At the show, Intel said Light Peak-equipped systems would begin to appear in 2010, and posted a YouTube video showing Light Peak-connected HD cameras, laptops, docking stations, and HD monitors. The technology was described as having an initial speed of 10 Gbit/s over plastic optical cables, and promising a final speed of 100 Gbit/s. Jason Ziller, head of Intel's Optical I/O Program Office showed the internal components of the technology under a microscope and the sending of data through an oscilloscope. The system was driven by a prototype PCI Express card, with two optical buses powering four ports.
#USB C ADAPTOR FOR MAC 1080P#
Intel introduced Light Peak at the 2009 Intel Developer Forum (IDF), using a prototype Mac Pro logic board to run two 1080p video streams plus LAN and storage devices over a single 30-meter optical cable with modified USB ends. Sumitomo Electric Industries started selling up to 30-metre-long (100-foot) optical Thunderbolt cables in Japan in January 2013, and Corning, Inc., began selling up to 60-metre-long (200-foot) optical cables in the US in late September 2013. Thunderbolt was commercially introduced on Apple's 2011 MacBook Pro, using the same Apple-developed connector as Mini DisplayPort. Apple registered Thunderbolt as a trademark, but later transferred the mark to Intel, which held overriding intellectual-property rights. This copper-based version of the Light Peak concept was co-developed by Apple and Intel. However, it was discovered that conventional copper wiring could furnish the desired 10 Gbit/s per channel at lower cost. It was initially marketed under the name Light Peak, and after 2011 as Silicon Photonics Link. The interface was originally intended to run exclusively on an optical physical layer using components and flexible optical fiber cabling developed by Intel partners and at Intel's Silicon Photonics lab. Thunderbolt can be implemented on PCIe graphics cards, which have access to DisplayPort data and PCIe connectivity, or on the motherboard of new computers with onboard video, such as the MacBook Air. When connected to a Thunderbolt device, the per-lane data rate becomes 10 Gbit/s and the four Thunderbolt lanes are configured as two duplex lanes, each 10 Gbit/s comprising one lane of input and one lane of output. When connected to a DP-compatible device, the Thunderbolt port can provide a native DisplayPort signal with four lanes of output data at no more than 5.4 Gbit/s per Thunderbolt lane.
Thunderbolt is interoperable with DP-1.1a compatible devices. Ī single Mini DisplayPort monitor or other device of any kind may be connected directly or at the very end of the chain. A single Thunderbolt port supports up to six Thunderbolt devices via hubs or daisy chains as many of these as the host has DP sources may be Thunderbolt monitors. Thunderbolt controllers multiplex one or more individual data lanes from connected PCIe and DisplayPort devices for transmission via two duplex Thunderbolt lanes, then de-multiplex them for use by PCIe and DisplayPort devices on the other end. Thunderbolt 2 port on MacBook Pro with Retina display. Thunderbolt 1 and 2 use the same connector as Mini DisplayPort (MDP), whereas Thunderbolt 3 and 4 reuse the USB-C connector from USB. Up to six peripherals may be supported by one connector through various topologies.
#USB C ADAPTOR FOR MAC SERIAL#
Thunderbolt combines PCI Express (PCIe) and DisplayPort (DP) into two serial signals, and additionally provides DC power, all in one cable. It was initially marketed under the name Light Peak, and first sold as part of an end-user product on 24 February 2011. It has been developed by Intel, in collaboration with Apple.
Thunderbolt is the brand name of a hardware interface for the connection of external peripherals to a computer. HS1TX(P) of the source is connected to HS1RX(P) of the sink. The cable is actually a crossover cable, it swaps all receive and transmit lanes e.g. This is the pinout for both sides of the connector, source side and sink side. Thunderbolt 4: 4× PCI Express 3.0, DisplayPort 2.0, USB4 Thunderbolt 3: 4× PCI Express 3.0, DisplayPort 1.2 (2 streams), USB 3.1 gen. Thunderbolt 2: 4× PCI Express 2.0, DisplayPort 1.2 Thunderbolt 1: 4× PCI Express 2.0, DisplayPort 1.1a Thunderbolt 3: 40 Gbit/s bidirectional, 80 Gbit/s one way
Thunderbolt 1: 2 channels, 10 Gbit/s each (20 Gbit/s in total) Via DisplayPort protocol or USB-based external audio cards.
0 kommentar(er)
